Lighting

Upgrading to new energy-efficient lighting, fixtures and controls can save energy, improve productivity, enhance product displays and more.  

Choose from a few different ways to perform your lighting upgrade and receive your incentive. 

Apply now or check your application status with your Pacific Power My Account

Are you a vendor, landlord, or don’t have a Pacific Power My Account set up? Or do you want to proceed as a guest (limited website functionality)?

Instant incentives

Instant incentives cover up to 70% of qualifying LED lighting purchases. Instant incentives are available for easy-to-install lamps that fit in many existing light fixtures.

Option 1: Get instant incentives from a participating distributor

  1. Identify which lamps to upgrade at your facility.
  2. Purchase qualified lamps from a participating instant incentive distributor and receive your instant incentive as a credit on your invoice from the distributor.
  3. Complete the instant incentive customer application with your distributor.
  4. Install new lamps in your Washington facility and enjoy the savings!

Option 2: Apply for incentives with a post-purchase application

  1. Identify which lamps to upgrade at your facility.
  2. Purchase qualified lamps from a vendor of your choice.
  3. Complete and submit the lighting post-purchase application, invoice and required documentation. Here are instructions for IRS Form W-9.
  4. Install new lamps in your Washington facility and enjoy the savings!
  5. Receive incentive check within 45 days of completion of Step 3.

Instant Incentives for Lighting (PDF)

MEASURE TYPE

MEASURE

CATEGORY

INCENTIVE*

LED

PLC/PLL Pin-based Lamp

PLC Pin-based Lamp < 10 W

$5/Lamp

PLC Pin-based Lamp ≥ 10 W

$6/Lamp

PLL Pin-based Lamp

$6/Lamp

2FT T8 TLED

Type B

$1.50/Lamp

Type C

$1.50/Lamp

4FT T8 TLED

Type A/B Dual Mode

$3/Lamp

Type C

$3/Lamp

8FT T8 TLED

Type B

$1.50/Lamp

Type C

$1.50/Lamp

8FT T8HO TLED

Type A/B Dual Mode

$2/Lamp

Type B

$2/Lamp

Type C

$2/Lamp

4FT T5 TLED

T5 TLED Lamp

$4.50/Lamp

T5HO TLED Lamp

$2.50/Lamp

HID Replacement Lamp

HID Replacement Lamp < 40 W

$17/Lamp

HID Replacement Lamp ≥ 40 W

$35/Lamp

 

* Incentives are capped at 70% of qualifying equipment costs. To be eligible for incentives, products must be listed on qualified products lists found in the lighting catalog.

HID = High Intensity Discharge (e.g. high pressure sodium, metal halide)
PLC = Pin Lamp Compact Fluorescent
PLL = Pin Lamp Long Compact Fluorescent
TLED = Tubular Light Emitting Diode
W = Watt

Apply now or check your application status with your Pacific Power My Account

Are you a vendor, landlord, or don’t have a Pacific Power My Account set up? Or do you want to proceed as a guest (limited website functionality)?

Incentives for lighting retrofits 

Get cash incentives and technical expertise for lighting upgrades. You can choose a Wattsmart Business Vendor or an independent energy consultant for a lighting analysis.

  1. Before you start your project, contact us or a Wattsmart Business Vendor and complete a general application or apply online. We require pre-approval and may need to verify existing equipment.
  2. We provide an incentive offer for you to sign before you order equipment. You provide your tax ID in a completed W-9 form (PDF) so we (or our program administrator) can prepare a 1099-Misc. (if required) following the incentive payment.
  3. Upgrade your lighting. 
  4. Submit project cost documentation including invoices with a breakdown of materials and labor. Then, contact Pacific Power or your Wattsmart Business Vendor for a post-installation inspection.
  5. Receive incentive check within 45 days of completion of step 4.

Lighting Retrofits Incentives (PDF)

CATEGORY

                                   ELIGIBILITY REQUIREMENTS

CUSTOMER INCENTIVE

Interior Lighting

Full fixture replacement

With upgrade to advanced controls

$0.46/kWh

With upgrade to basic controls

$0.38/kWh

Without controls upgrade

$0.35/kWh

Fixture retrofit kits

With controls upgrade to basic or advanced networked lighting controls

$0.35/kWh

Without controls upgrade

$0.28/kWh

Lamp replacement

TLED lamp

$0.10/kWh

Other lamp-only replacements

See instant incentives for lighting

Controls-only retrofit

Controls-only upgrade to advanced networked lighting controls

$0.46/kWh

Controls-only upgrade to basic controls

$0.35/kWh

Exterior Lighting

 

 

Full fixture replacement (except street lighting)

With upgrade to advanced dimming controls

$0.22/kWh

Without controls upgrade

$0.12/kWh

Fixture retrofit kits (except street lighting)

With upgrade to advanced dimming controls

$0.14/kWh

Without controls upgrade

$0.11/kWh

Lamp replacement (except street lighting)

Lamp-only replacements

See instant incentives for lighting

Street lighting

With upgrade to advanced dimming controls

$0.12/kWh

Without controls upgrade

$0.09/kWh

Controls-only retrofit

Controls-only upgrade to advanced dimming controls

$0.14/kWh

Non-general Illuminance

LED case lighting – refrigerated case

LED replacing fluorescent lamp in existing refrigerated cases. LED must be listed on qualified equipment list.

$14/linear foot

LED case lighting – freezer case

$14/linear foot

Refrigerated case occupancy sensor

Installed in existing refrigerated case with LED lighting

$1.50/linear foot

Controlled Environment Agriculture (CEA)

Full fixture replacement

With or without controls upgrade

$0.22/kWh

Lamp replacement

TLED lamp
With or without controls upgrade

$0.10/kWh

Other lamp-only replacements

With or without controls upgrade

See instant incentives for lighting

Custom Lighting

Custom

Not listed above

$0.13/kWh

 

Notes for lighting retrofit incentives:

  1. To be eligible for the incentives listed, the new lighting system must use less energy than the existing lighting system replaced or the baseline lighting system as determined by Pacific Power. To be eligible for an incentive for a system with controls, the new controls must save energy relative to existing controls.
  2. Incentives are capped at 70% of energy efficiency project costs and incentives will not be available to reduce the energy efficiency project simple payback below one year. Energy efficiency project costs are subject to Pacific Power approval. 
  3. Incentives listed as $/kWh are paid per kWh annual energy savings as determined by Pacific Power. 
  4. Eligible retrofit lighting equipment is defined in qualified equipment lists posted in the Washington lighting catalog
  5. A complete list of lighting equipment not eligible for retrofit incentives is available in the Washington lighting catalog.

Apply now or check your application status with your Pacific Power My Account

Are you a vendor, landlord, or don’t have a Pacific Power My Account set up? Or do you want to proceed as a guest (limited website functionality)?

Incentives for new construction/major renovation

Get cash incentives and technical expertise for lighting installed as part of  new construction or major renovation. You can choose a Wattsmart Business Vendor or an independent energy consultant for technical expertise.

  1. Obtain an incentive application package and catalog from us or a Wattsmart Business Vendor (pre-approval is recommended but not required). The package includes the general application, application supplement, and IRS Form W-9.
  2. Review and approve lighting proposal and sign incentive application.
  3. Submit your incentive application package. Here are instructions for IRS Form W-9.
  4. Receive incentive check within 45 days of completion of step 3.

Lighting New Construction/Major Renovation Incentives (PDF)

MEASURE

CATEGORY

ELIGIBILITY REQUIREMENTS

CUSTOMER INCENTIVE

Interior Lighting

Troffer

Products must be listed on qualified equipment list. Products must be installed in facilities where energy code applies.

$14/fixture

Linear ambient

$14/fixture

High bay

$30/fixture

Other fixtures (not listed above)

$0.74/fixture wattage

Advanced networked lighting controls

$1.20/W controlled

Custom interior lighting

Products must be installed in facilities where energy code does not apply

$0.10/kWh annual energy savings

Controlled Environment Agriculture (CEA)

LED fixture

Products must be listed on qualified equipment list.

$0.12/kWh

 

Notes for new construction/major lighting incentives:

  1. Project cost caps of 70% and one-year simple payback caps apply to new construction and major renovation projects that are not subject to state energy code. The one-year simple payback cap means incentives will not be available to reduce the simple payback of a project below one year. If required, individual measure incentives will be adjusted downward pro-rata so the project has a simple payback after incentives of one year. 
  2. Lighting equipment installed to comply with the applicable version of the state energy code, but not exceeding that code, is not eligible for incentives. Lighting equipment that exceeds the applicable version of the state energy code is eligible for incentives.
  3. Eligible lighting equipment is defined in qualified equipment lists in the Washington lighting catalog.

Apply now or check your application status with your Pacific Power My Account

Are you a vendor, landlord, or don’t have a Pacific Power My Account set up? Or do you want to proceed as a guest (limited website functionality)?

Let us help you get started

Or select from a list of Premium Vendors for lighting.
1-855-805-7231
WattsmartBbusiness@PacificPower.net

Need help with project financing?

Pacific Power teams up with National Energy Improvement Fund (NEIF) to help businesses pay for energy upgrades. Learn more

Do you have a small business?

Check out the enhanced lighting retrofit incentives for small businesses, which are only available if a Wattsmart Small Business Approved Vendor installs your new lighting. Learn more

See more incentives

Motors and drives

Find out more

Food service

See details

Compressed air

Find out more

Building envelope

Learn more

Appliances

See incentives

Wastewater and other

Find out more